T5C-XG
Multilayer 10 Gigabit Ethernet Service Switch

Enlarge

The T5C-XG is a member of Telco Systems' field-proven T5 Compact family of Carrier Ethernet switches.

The T5C-XG's high performance, availability and form factor are ideal for broadband triple-play service aggregation and business Ethernet services.

T5C-XG utilizes BATM's/Telco Systems' Inter Networking Operating System (BiNOS) to provides the robust administration, management, QoS, and security performance requirements demanded by Carrier Ethernet networks.

T5C-XG service multiplexing capability enables the service providers to deliver multiple, isolated, services on a per-port basis and/or on a per-flow basis. Provisioning, monitoring and troubleshooting of each individual service can be done without impacting other services.

T5C-XG offers the carrier an ideal solution, offering high capacity and compact size (only 1.5RU in height, 10” in depth). T5C-XG supports 24 Gigabit Ethernet plug-in (SFP) ports, 2 10Gigabit XFP ports and 1 10Gigabit expansion slot with 10GE ports. T5C-XG supports redundant power feeds and hotswappable fan tray.

The T5C-XG provides a wide set of QoS features that enable the service provider to have a granular control over the behavior of traffic and services in the network. In addition, the T5CXG delivers a comprehensive set of security features for authentication, connectivity and access control.

The T5C-XG provides an essential combination of QoS, security and multicast features allowing the service provider to successfully deploy tripleplay services, thus enhancing its competitive edge.

T5C-XG is fully manageable via SNMP or CLI with either In-band (IB) or Out-of-Band (OOB) management tools. The CLI complies with the de facto industry standard.

Administrators can use industry standard SNMP-based network management systems, or the BiNOSCenter. BiNOSCenter is Telco Systems' EMS/NMS Element/Network Management System. It provides the network operator with a state-of-the-art, powerful, SNMP based configuration, monitoring and maintenance platform.

Specifications

Switching Characteristics

• Bridging: IEEE 802.1d Spanning Tree Algorithm
  
• Flow Control - IEEE 802.3x for full duplex mode
  
• Provides Broadcast storm protection
  
• Supports Jumbo frame up to 9Kbytes
  
• VLANs support:
  
  
  • Supports IEEE 802.3ac frame extension for VLAN tagging
    
  • Supports IEEE 802.1Q VLAN
    
  • Supports the full range (4K) active VLANs entries
    
  • Private VLAN
  
  
• Supported protocol types - IPv4, ARP, RARP
  
• Supported frame types - Ethernet type II, LLC,RFC 1042
  
• Supports GVRP protocol for dynamic VLAN management
  
• Supports IGMP snooping (v1/v2) and IGMP v1/v2 querier
  
• Spanning Tree (IEEE 802.1D, IEEE 802.1w and IEEE 802.1s)
  
• Link Aggregation (IEEE 802.3ad)
  
• Quality of Service (QoS)
  
  
  • 8 priority levels in switching (IEEE 802.1p)
    
  • Priority queue scheduling schemes - Weighted Round Robin (WRR), Strict Priority and Deficit Round Robin(DRR)
    
  • Per port bandwidth management
    
  • Ingress and egress
    
  • Gigabit port
    
  • Range 1 ~ 1000Mbps, resolution 1Mbps
  
  
• Traffic classification and priority management based on:
  
  
  • IEEE 802.1p (COS)
    
  • IP Precedence (TOS)
    
  • IP precedence based COS
    
  • DSCP based COS
    
  • TCP/UDP port based COS
    
  • DiffServ
  
  

Management

• STD-15 SNMPv1
  
• STD-16 SMIv1
  
• STD-17 MIB-II
  
• STD-50 EtherLike MIB
  
• STD-58 SMIv2,
  
• STD-59 RMON
  
• STD-62 SNMPv3
  
• SNMPv2c
  
• SNMPv1
  
• RFC2668 MAU
  
• RFC2925 Ping MIB
  
• BATM/ Telco Systems Private MIBs
  
• CLI: Serial, Telnet, SSH
  
• Interface: In-Band/ Out-of-Band
  
• Local Interface: RJ-45, RS-232
  
• SW Download: via TFTP